150 F4 SF C RB67 и замер

Всего 7 сообщ. | Показаны 1 - 7
150 F4 SF C RB67 и замер
Есть ли какие тонкости?Заказать собираюсь.Призмы у меня нет,только внешний экспонометр и цифротушка.
Отсюда вопрос - есть ли какие тонкости с замером при использовании софт-дисков?Нормально ли данный объектив на RZ67 работает?
Re[MaF]:
Хм,у кого нибудь вообще был такой объектив?
Re[MaF]:
Нормально работает замер. Не забывайте, какой диск у Вас установлен и, соответсвенно, на какую диафрагму ориентироваться. А вот делать экспокоррекцию, это уже на любителя, некотрые любят поплотнее (негативы). :D
С RZ он работает так же, как и другие RB-объективы. Никаких эксплуатационных особенностей, кроме защелкивающегося репетира диафрагмы (для фокусировки) , у этого объектива нет.
Re[Ondatr]:
понял,спасибо
значит буду брать
PS - а без дисков он как обычный объектив?
Re[MaF]:
Цитата:
от: MaF

PS - а без дисков он как обычный объектив?


Нет. Без дисков он тоже мягок на открытой диафрагме. Эффект пропадает при Ф8.
Это из инструкции для этого объектива.


Focusing
The special spherical aberration used in this lens to produce the soft focus effect
causes some discrepancy in focusing when this is done at full aperture; therefore,
when focusing always stop this lens down to at least f/8 to cancel the soft focus
effect.
The No. 1 Matte and No. 2 Checker focusing screens are ideal for use with this lens.
The No. 3 Rangefinder Spot or No. 4 Microprism focusing screen may be used,
however, by stopping down to f/8 or more and using the mat area.
1. Set the lens aperture at f/8.
2. Press the depth-of-field preview lever down. The lever locks into position
automatically.
3. Focus.
4. Set the lens to the desired aperture.
5. Return the depth-of-field preview lever to its original position by slightly
pressing it in the return direction. The lever will then return automatically.
Adjustment of the Soft Focus Effect
The degree of soft focus effect varies depending on whether or not the Softness
Control Discs are used and in accordance with which of the three Discs is used. The
amount of effective softness, however, will also depend on the type of subject,
distance, lighting conditions, the amount of enlargement given the negative, the
concept, personal Iikes, etc.
1. When not using a Softness Control Disc
The soft focus effect varies depending on the aperture used. At full aperture (f/41
the softest effect is obtained. The effect is less at f/5.6 and completely disappears at
f/8 or smaller apertures to produce a normal sharp image.
2. When using a Softness Control Disc
There are three different types of Softness Control Discs, each with a different
diameter hole in the center.
* Always set this lens at full aperture (f/4) when using one of the Softness Control
Discs. The f-value of this lens changes according to the Disc used. When the No. 1
Disc is used the effective lens aperture is approximately f/5; for the No. 2 Disc this
value is approximately f/5.6; and for the No. 3 Disc it is approximately f/6.3.
How to attach the Softness Control Discs
1. Remove the front lens barrel by rotating it counterclockwise.
2 . Slip the disc to be used over the rear end of the front lens barrel.
3. Put the front lens barrel back into place and tighten by rotating it clockwise.
Depth-of-field
The depth-of-field and the degree of softness can be easily checked by stopping
lens down to the preset aperture by operating the depth-of-field preview lever.
Other functions
All other functions such as removal and attachment of the lens, operation of
mirror lock-up, etc., are the same as for standard Mamiya-Sekor lenses.

PS. Если есть желание, то можно попробовать его перед принятием окончательного решения. Там все ж не очень оперативно с фокусировкой.
Re[Ondatr]:
Спасибо.Вы в Москве?Погода счас правда не располагающая к съемке.Да и штатива у меня нет.Временно нет ;-)
Re[MaF]:
Да, я в Москве. Проблема штатива - не самая большая. Она вполне решаема. :-) Подробности мы можем решить через личку.
Вы не авторизованы

Пожалуйста, авторизуйтесь, чтоб иметь доступ к полному функционалу сайта

Обратная связь

Здесь вы можете оставить свои контактные данные, чтобы мы могли связаться с вами.